Foot and Ankle Injury ICD-10 Codes

Foot and ankle injury ICD-10 codes for sprains, fractures and 7th character coding

Foot and ankle injury ICD-10 codes come from Chapter 19 of ICD-10-CM, mainly categories S82, S86, S90, S91, S92 and S93. Each code needs the injury type, the exact site, the side and a 7th character for the encounter. For example, S93.401A reports an initial visit for a right ankle sprain.

Injury claims fail for small reasons. A missing 7th character, a wrong side or an “A” on a follow-up visit is enough for a payer to reject the line. This guide explains how foot and ankle injury ICD-10 codes work, lists the codes podiatrists and foot and ankle surgeons report most, and shows how to pick the right encounter character every time.

Key Takeaways

  • Injury codes for the foot and ankle sit in S82 to S99, and most need seven characters to be billable.
  • The 7th character tracks the encounter: A for active treatment, D for routine healing and S for a sequela.
  • A follow-up visit during normal healing takes a D, even when it is the patient’s first visit to your office.
  • The code itself carries laterality, so the note must state right or left.
  • Stress fractures and other non-traumatic problems use M codes instead of S codes.
Table of Contents
  1. How Foot and Ankle Injury ICD-10 Codes Work
  2. Ankle Sprain ICD-10 Code Options
  3. Foot Fracture ICD-10 Codes and Calcaneal Fractures
  4. The 7th Character Extender for Foot Injury ICD-10 Codes
  5. Foot Injury Laterality Coding Rules
  6. Open Wound Foot ICD-10 Codes
  7. Sequencing Multiple Injuries and External Cause Codes
  8. Worked Example: Fifth Metatarsal Fracture
  9. Common Foot and Ankle Injury ICD-10 Coding Errors
  10. Getting Foot and Ankle Injury ICD-10 Codes Right
  11. Frequently Asked Questions

How Foot and Ankle Injury ICD-10 Codes Work

Every foot and ankle injury ICD-10 code follows the same pattern. The first three characters name the category, such as S93 for a dislocation or sprain of the ankle, foot and toe joints. Next, the fourth to sixth characters add the structure, the injury type and the side. Finally, the 7th character tells the payer where the patient is in the course of care.

Take S93.401A as an example. S93.4 means a sprain of an ankle ligament, the 0 means the ligament is unspecified, the 1 means the right side, and the A means an initial encounter. If the code needs a 7th character but has fewer than six characters, the placeholder X fills the gap, as in S90.31XA for a contusion of the right foot.

So a code that stops at six characters, such as S93.401, is a header and not a billable code. Payers reject it outright. Therefore, the EHR pick list should never offer a header code for an injury.

Ankle Sprain ICD-10 Code Options

The ankle sprain ICD-10 code depends on which ligament the clinician names. When the note only says “ankle sprain,” the coder has to use the unspecified ligament code. However, an exam that identifies the ligament supports a more specific code, and payers look for that detail on imaging and therapy claims.

InjuryRight (initial)Left (initial)Note
Ankle sprain, unspecified ligamentS93.401AS93.402AUse only when the ligament is not named
Calcaneofibular ligament sprainS93.411AS93.412ACommon lateral ankle sprain
Deltoid ligament sprainS93.421AS93.422AMedial ankle
High ankle (tibiofibular ligament) sprainS93.431AS93.432ASyndesmotic injury
Other ankle ligament sprain, such as the ATFLS93.491AS93.492AAnterior talofibular ligament
Tarsometatarsal (Lisfranc) sprainS93.621AS93.622AMidfoot ligament injury
Contusion of footS90.31XAS90.32XAPlaceholder X before the 7th character
Achilles tendon strainS86.011AS86.012AUse S86.02- for a laceration

For instance, there is no separate code for the anterior talofibular ligament (ATFL). It indexes to “other ligament,” so S93.491A is the right choice for a right ATFL sprain. In the same way, an Achilles tendon tear from trauma uses S86.0-, while a tear that happens without injury is a musculoskeletal condition and does not belong in Chapter 19.

Foot Fracture ICD-10 Codes and Calcaneal Fractures

Foot fracture ICD-10 codes need more detail than sprains. Specifically, the code names the bone, the part of the bone, whether the fracture is displaced and whether it is open or closed. Category S92 covers the foot and toes, while S82 covers the ankle bones of the lower leg.

  • Fifth metatarsal fracture: S92.351A for a displaced fracture of the right fifth metatarsal at the first visit for a closed fracture.
  • Unspecified metatarsal fracture: S92.301A, used only when imaging does not name the bone.
  • Great toe fracture: S92.401A for a displaced, unspecified fracture of the right great toe.
  • Lateral malleolus fracture: S82.61XA for a displaced fracture of the right lateral malleolus.
  • Medial malleolus fracture: S82.51XA for the right side.
  • Bimalleolar fracture: S82.841A for a displaced fracture of the right lower leg.

Calcaneal Fracture ICD-10 Codes

The calcaneal fracture ICD-10 subcategories split the heel bone by region. S92.01- covers the body, S92.02- the anterior process, S92.03- an avulsion of the tuberosity, S92.04- other tuberosity fractures, S92.05- other extraarticular fractures and S92.06- intraarticular fractures. For example, S92.011A is a displaced fracture of the body of the right calcaneus at the first visit.

Two defaults matter here. If the record does not say whether a fracture is displaced, the guidelines direct you to code it as displaced. Similarly, code a fracture as closed when the note does not say open or closed. Even so, the better fix is to ask the provider, because the default may not match the films.

A stress fracture is not an S code. For example, a stress fracture of the right foot uses M84.374A, and a fracture caused by disease uses a pathological fracture code. Using S92 for a stress fracture tells the payer there was trauma when there was none.

The 7th Character Extender for Foot Injury ICD-10 Codes

The 7th character extender for foot injury ICD-10 codes causes more denials than any other part of the code. It does not mean “first visit” or “return visit.” Instead, it reflects the phase of care, as the FY 2027 ICD-10-CM Official Guidelines define it.

7th characterMeaningFoot and ankle example
AInitial encounter, closed fracture or injury under active treatmentER visit, first evaluation and treatment, surgery
BInitial encounter for an open fractureOpen fifth metatarsal fracture at the first repair
DSubsequent encounter, routine healingCast change, follow-up X-ray, boot removal
GSubsequent encounter, delayed healingFracture healing slower than expected
KSubsequent encounter, nonunionFracture that has not joined
PSubsequent encounter, malunionFracture healed in a poor position
SSequelaPost-traumatic arthritis after an old ankle fracture

In practice, A continues as long as the patient receives active treatment. So a podiatrist who sees a patient two days after an urgent care visit and starts definitive treatment still reports A. On the other hand, once active treatment ends, routine visits during healing take D, even if a new provider sees the patient for the first time.

Sequela coding works in two steps. First, code the late effect itself, such as post-traumatic arthritis. Then add the injury code with an S as the 7th character. When the 7th character is wrong, the claim fails edits or invites a records request. That is one more reason practices rely on expert podiatry RCM services to catch encounter errors before claims go out.

Foot Injury Laterality Coding Rules

Foot injury laterality coding rules are simple, but they still trip up busy offices. Almost every code in S82 through S99 has a right, left and unspecified version. So the note must name the side, and the code must match the side in the procedure note and the imaging report.

  • Right and left injuries at once: when no bilateral code exists, report one code for each side.
  • Unspecified side: use it only when the record truly does not say, and expect some payers to deny it.
  • Side conflicts: if the assessment says right and the X-ray says left, query the provider before billing.
  • Toes: many toe codes also name the great toe or lesser toes, so record which toe was hurt.

Laterality errors often start with copied notes. For example, a template that defaults to “right” can carry the wrong side into every follow-up visit. As a result, the 7th character, the side and the procedure code all need a fresh check at each encounter.

Open Wound Foot ICD-10 Codes

Open wound foot ICD-10 codes sit in category S91. The code names the wound type, whether a foreign body is present, the site and the side. For example, S91.311A reports a laceration without a foreign body of the right foot, and S91.331A reports a puncture wound without a foreign body of the right foot. Likewise, S91.011A covers a laceration of the right ankle.

The S91 category also tells you to code any associated wound infection. However, a chronic, non-healing ulcer is not an open wound injury, and it follows a different coding path. Our wound care ICD-10 codes guide explains how to code chronic ulcers and their depth.

Sequencing Multiple Injuries and External Cause Codes

When a patient has several injuries, list the most serious one first, based on the provider’s assessment and the focus of treatment. In addition, do not code a superficial injury, such as an abrasion or contusion, when a more severe injury of the same site is coded. For example, a bruise over a fractured fifth metatarsal is part of the fracture.

External cause codes explain how the injury happened, such as W01.0XXA for a fall on the same level from slipping or tripping. There is no national rule that requires them, but some states and payers do. When you use them, keep the same 7th character as the injury code for the whole course of care.

Injury Codes Versus Chronic Conditions

Not every painful foot is an injury. Chronic heel pain, plantar fasciitis, bunions and flatfoot use M codes, so mixing them with S codes confuses the claim. For those non-traumatic deformities and chronic pain codes, see our general podiatry ICD-10 reference guide.

Worked Example: Fifth Metatarsal Fracture

Consider a hypothetical patient who twists her right foot stepping off a curb. Urgent care takes an X-ray, finds a displaced fracture of the right fifth metatarsal and places her in a splint. Two days later, the podiatrist confirms the fracture and fits a walking boot.

  1. Urgent care visit: S92.351A, because the patient is receiving active treatment, with W01.0XXA if the payer wants external causes.
  2. Podiatry visit two days later: S92.351A again, because the podiatrist starts definitive treatment, so active care continues.
  3. Follow-up X-ray at four weeks: S92.351D, because healing is routine and active treatment has ended.
  4. Visit for slow healing at ten weeks: S92.351G, if the provider documents delayed healing.

In short, the same fracture uses four different 7th characters over one course of care. Each one has to match what the note says on that date. Then the procedure codes, such as fracture care and casting, need to line up with the same diagnosis, as our podiatry CPT codes guide explains.

Common Foot and Ankle Injury ICD-10 Coding Errors

  • Billing a header code. S93.401 without a 7th character is not billable.
  • Using A for every visit. Routine healing visits take D, so check the plan before you pick A.
  • Dropping the placeholder X. S90.31A is invalid, while S90.31XA is correct.
  • Choosing unspecified when the note is specific. If the exam names the ligament or bone, code it.
  • Coding trauma for a stress fracture. Use M84.37- when there was no injury.
  • Ignoring open fractures. An open fracture needs B at the first visit, not A.

Getting Foot and Ankle Injury ICD-10 Codes Right

Accurate coding comes down to four checks: the injury type, the exact structure, the side and the phase of care. Get those right, and the claim tells the same story as the chart. Then review new codes each October, because the code set changes every year.

Get Foot and Ankle Injury Claims Paid the First Time

ORCM’s podiatry coders check every injury claim for the right 7th character, side and fracture detail before it goes to the payer, and they follow up on the denials that slip through.

Talk to our podiatry billing team.

Frequently Asked Questions

What is the ICD-10 code for an ankle sprain?

It depends on the ligament and the side. S93.401A is an initial visit for a right ankle sprain with an unspecified ligament, and S93.402A is the left side. Use a more specific code, such as S93.411A for the calcaneofibular ligament, when the exam names the ligament.

When do you use A versus D as the 7th character?

Use A while the patient receives active treatment, such as the first evaluation, surgery or a new treatment plan. Use D for routine visits during healing, such as cast changes and follow-up X-rays.

What is the ICD-10 code for an Achilles tendon injury?

Traumatic Achilles injuries use S86.0-. For example, S86.011A is a strain of the right Achilles tendon and S86.021A is a laceration of the right Achilles tendon, both at the initial encounter.

How do you code a fracture that is not described as displaced?

The official guidelines direct you to code it as displaced. Likewise, code a fracture as closed when the note does not say open or closed. Even so, a provider query is the better fix.

Is a stress fracture of the foot coded as an injury?

No. A stress fracture uses a musculoskeletal code, such as M84.374A for the right foot, because it does not come from a single traumatic event.

In this guide
Get in touch