Post-Op Visits Denied? Orthopedic Modifiers for the 90-Day Global Period

Orthopedic surgery modifiers for the 90-day global period

Orthopedic surgery modifiers decide whether a post-op visit gets paid or disappears into the surgical fee. Surgeons keep seeing patients after surgery for complications, new injuries and staged procedures. Yet the payer often treats all of it as part of the global package, because the claim never explained why the patient came back.

Quick answer: Pick the modifier by why the patient returned. The visit that led to major surgery takes modifier 57. An unrelated visit during the global period takes 24, and an unrelated procedure takes 79. A planned or staged procedure takes 58. An unplanned, related return to the operating room takes 78. RT and LT mark the side on paired body parts.

Key Takeaways on Orthopedic Surgery Modifiers

  • Modifier 57 goes on the visit where the surgeon decided to perform major surgery. It does not apply to minor procedures.
  • Modifier 24 separates an unrelated visit from the global package, but only with an unrelated diagnosis on the claim line.
  • Modifier 58 marks planned or staged work, and modifier 79 marks unrelated work. Both start a new global period.
  • Modifier 78 pays only the surgical portion of an unplanned return to the OR and does not restart the global period.
  • RT, LT and digit modifiers prevent duplicate-claim denials on paired body parts.
  • Fracture care has its own global period, and routine follow-up stays inside it.

What Does the 90-Day Global Period Cover?

Medicare assigns most major orthopedic surgeries a 90-day global period. The package includes the preoperative visit the day before or the day of surgery, the surgery itself, and routine follow-up for 90 days afterward. Minor procedures carry a 0-day or 10-day global period instead.

Because one surgical fee prepays the package, a follow-up visit billed without the right modifier is bundled or denied. However, the package does not cover every return visit. Complications the surgeon treats without a return to the operating room are included. A new injury, a separate illness or a planned later procedure is not. Each of the orthopedic surgery modifiers below answers one question about the visit, and that answer decides whether the claim pays.

Modifier 57 vs Modifier 25: The Visit That Decides Surgery

Modifier 57 goes on the E/M visit where the surgeon first decided to perform major surgery, on the day before or the day of the operation. Without it, Medicare treats that visit as part of the surgical payment. In short, the modifier 57 vs 25 difference comes down to the type of procedure. Modifier 57 marks the decision for a major surgery with a 90-day global period. Modifier 25 marks a significant, separately identifiable E/M service on the same day as a minor procedure. Medicare does not accept 57 on visits for minor procedures with 0-day or 10-day globals.

Documentation decides these claims. Payers look for the exam findings that changed the plan, the reason surgery became necessary, and a clear statement of the decision. For example, a note that reads “patient seen, surgery scheduled” invites a denial. A note that records new neurologic deficits and the decision to proceed with decompression supports the claim. When the decision visit is also the patient’s first visit with the practice, choose the level using the new patient CPT codes.

Modifier 24: The Unrelated Visit During the Global Period

Take a patient six weeks out from a total knee replacement who falls and fractures her wrist. The visit has nothing to do with the knee. Still, the payer’s edits see a claim inside a 90-day global period and deny it. Modifier 24 is the fix, because it marks an E/M service during the postoperative period that is unrelated to the original surgery.

The note has to show the separation. That means a distinct diagnosis for the new condition, exam findings for it, and a plan that does not involve the surgical site. Also, when you bill modifier 24 or 79, put the unrelated diagnosis on that claim line. A line with only the surgical diagnosis reads as postoperative care, no matter what the chart says.

Use modifier 24 only when the condition is truly separate. Wound problems, stiffness and swelling around the operated joint are complications of the surgery, so a 24 on those visits invites an audit.

Modifier 58 vs 78 vs 79: Planned Work, Returns to the OR and New Problems

These three orthopedic surgery modifiers decide payment when the same surgeon operates again during the global period.

  • Modifier 58, planned or staged: The surgeon planned the second procedure at or before the first one, or the second procedure is more extensive than the first. External fixation followed by definitive fixation is a common example. The plan has to appear in the original operative note or plan of care.
  • Modifier 78, unplanned return to the OR: The patient goes back to the operating room for a related problem, such as a washout for a hematoma, repair of a wound dehiscence or a reoperation for a dislocation.
  • Modifier 79, unrelated procedure: The new procedure has nothing to do with the first surgery. For example, a carpal tunnel release during the global period of a lumbar fusion.

For modifier 78, an “operating room” means a place equipped and staffed for procedures. A patient’s room, a minor treatment room, a recovery room or an ICU counts only when the patient was too unstable to move. A related problem treated in the office or at the bedside stays inside the global package.

How Payment Differs for 58, 78 and 79

Modifiers 58 and 79 each start a new global period, and the procedure is paid at the full fee schedule amount. Modifier 78 pays only the intraoperative portion of the procedure, and the original global period keeps running. As a result, coding a planned stage as 78 underpays the claim. Coding an unplanned return as 58 overpays it and creates audit risk. Medicare’s global surgery booklet sets out these rules, and our guide to orthopedic coding challenges covers the bundling edits that come with them.

What happenedModifierWhat the note needsHow it pays
E/M where the surgeon decided on major surgery57Decision statement, findings, reason for surgeryE/M paid separately
Significant separate E/M on a minor-procedure day25Separately identifiable visit noteE/M paid separately
Unrelated visit during the global period24Unrelated diagnosis on the visit lineE/M paid separately
Planned or staged procedure58Plan in the original operative noteFull fee, new global period
Unplanned return to the OR, related problem78Operative report for the returnIntraoperative portion only, no new global
Unrelated procedure during the global period79Distinct diagnosis and operative noteFull fee, new global period

When the same modifier errors repeat across many cases, the fix usually belongs in the coding workflow, not in one claim. That is where orthopedic billing services help.

RT/LT Modifiers: Keeping Sides Straight

RT/LT modifiers are the simplest orthopedic surgery modifiers to apply, yet a missing RT or LT is a common cause of duplicate denials. They tell the payer which side of the body a procedure involved. Smaller body parts have their own modifiers: FA through F9 for the fingers and TA through T9 for the toes. Without them, the payer sees two lines with the same code, cannot tell them apart, and denies the second line as a duplicate. So the operative note, the imaging and the implant records should all name the same side.

Bilateral work follows its own rule. When the same procedure is done on both sides and the code allows bilateral billing, Medicare expects one line with modifier 50 and one unit, as Noridian’s laterality modifier guidance explains. In contrast, different procedures on each side go on separate lines with RT and LT.

Do not put RT or LT on the same line as modifier 50. Some commercial plans want bilateral work split into RT and LT lines instead, so check each payer’s billing rules.

Payer rules shift again for work injuries, because each carrier sets its own edits and documentation needs. That is why many practices send those claims through workers’ compensation billing services.

The Fracture Care Global Period

The fracture care global period is 90 days for most closed and open fracture treatment codes. Routine cast checks, healing X-ray reviews and follow-up visits fall inside it, so billing them separately triggers an edit.

However, the global period does not cover everything after a fracture. A replacement cast is separately reportable, for example when swelling goes down and the first cast no longer fits. Medicare expects modifier 58 on the cast code, while other payers set their own rules. A malunion or nonunion that needs another operation uses the same orthopedic surgery modifiers as any second procedure: 78 for an unplanned, related return to the OR, and 79 when the new work is unrelated.

Split care follows its own rule. Modifiers 54 and 55 are the orthopedic surgery modifiers for fracture care shared between two physicians. Each physician bills the same procedure code and date of service. The physician who performed the procedure adds modifier 54, and the physician who provides the post-op care adds modifier 55. The chart should document the transfer of care.

Orthopedic Surgery Modifiers in Practice: One Knee Replacement

Here is how one patient’s claims look across one global period. The surgeon performs a total knee replacement (CPT 27447), which carries a 90-day global period.

  1. Day before surgery: The surgeon examines the patient, reviews imaging and decides to operate. The visit bills as an E/M, such as 99214, with modifier 57.
  2. Surgery day: 27447 bills once. It covers the operation and 90 days of routine post-op care.
  3. Week 6 wrist fracture: The patient falls and breaks her wrist. The wrist evaluation bills as an E/M, such as 99213, with modifier 24 and the wrist fracture diagnosis on the line. If the surgeon also treats the fracture, that procedure takes modifier 79 and starts its own global period.
  4. Week 8 hematoma washout: The patient returns to the operating room for a knee hematoma. The washout bills with modifier 78 and pays only the intraoperative portion. The knee’s global period keeps running from the original surgery date.

Beyond the surgery itself, three services pay separately, and each one pays only because the orthopedic surgery modifiers and diagnoses on the claim explain why the patient came back.

A Pre-Submission Checklist for Orthopedic Surgery Modifiers

Run this check before any claim inside a global period goes out:

StepWhat to verifyWhat it prevents
Global period0, 10 or 90 days for the original surgeryFollow-up visits billed in the wrong window
Modifier matchOne modifier chosen by what happenedBundled visits and denials
DiagnosisUnrelated diagnosis on every 24 and 79 lineClaims that read as post-op care
LateralityRT, LT, 50 or digit modifiers match the operative note and imagingDuplicate-claim denials
Planned intentOriginal operative note states the staged plan for 58Audit risk on returns coded as 58
Payer rulesEach contract’s bilateral and staged-procedure rulesEdits copied from the wrong payer

Conclusion: Getting Post-Op Claims Paid

Most post-op denials in orthopedics come from habit. Every follow-up visit is coded the same way, so the one visit that breaks the pattern gets denied. So sort each return by what happened, choose the orthopedic surgery modifiers that match, and attach documentation a reviewer can read in one pass.

Need Help With Orthopedic Surgery Modifiers?

ORCM’s orthopedic billing team checks global periods, modifiers and laterality before claims go out, and appeals the denials that slip through.

Explore ORCM’s orthopedic billing services or our broader medical billing and RCM support.

Frequently Asked Questions

Can I bill an office visit during the 90-day global period without a modifier?

Not if the visit is related to the surgery, because routine follow-up is part of the global fee. An unrelated visit needs modifier 24 and an unrelated diagnosis on the claim line.

When do modifiers 54 and 55 apply?

When two physicians split the care. The one who performed the procedure bills it with modifier 54, and the one who handles post-op care bills the same code with modifier 55.

What is the difference between modifier 57 and modifier 25?

Modifier 57 marks the visit where the surgeon decided on major surgery, on the day before or day of the operation. Modifier 25 marks a significant, separately identifiable visit on the same day as a minor procedure.

When do I use RT and LT instead of modifier 50?

Use modifier 50 on one line when the same procedure was done on both sides. Use separate RT and LT lines when each side had a different procedure, or when the payer requires split lines.

Is a replacement cast billable during the fracture care global period?

Yes. The first cast is part of the fracture care package, but a replacement cast is separately reportable when the note explains why it was needed. Medicare expects modifier 58 on the cast code.

Which orthopedic surgery modifiers start a new global period?

Modifiers 58 and 79. Modifier 78 does not, and the E/M modifiers 24, 25 and 57 do not affect the global period.

In this guide
Get in touch